Light In This World

Search This Blog

Tutorials I Found Useful

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Photoshop:

I learned about "Blend If" from this:

and this:

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Comments

Reset Mac Mini to Factory Settings using Windows Keyboard

Before returning the Apple Mac Mini with Apple M1 Chip (8GB RAM, 256GB SSD Storage) to exchange for Apple Mac Mini with Apple M1 Chip (8GB RAM, 512GB SSD Storage) , I had to reset it to factory settings. While it turned out to be a simple process, I didn't know exactly how to go about it initially since I was using a USB Windows keyboard. Here's what I had to do restore it to factory settings: shutdown the system while simulatenouly pressing and holding Windows key + R key on windows keyboard, press and hold the Power button on Mac Mini until MacOS utilities dialog appears. Let go off the keys and power button now Erase (i.e.) format the disk using Disk Utility option from MacOS utilities dialog. Exit Disk Utility once formating is completed. choose Install MacOS option from the MacOS utilities dialog and follow the prompts. Installation may take over an hour. The same can be done using a Mac keyboard but by pressing and holding Command + R keys while pressing a

These Days...Home Is Where The Key Is

This key hasn't been used in the past three weeks. Shelter in place (and social distancing) has given my key a break. I hope my house will get a much needed break...sooner than later. 😊 Stay safe. Shot with Sony 90mm f/2.8 macro lens on a Sony a7R III . Lighting was provided by an off camera flash ( Godox AD200 , camera-left and triggered by Godox Xpro-S Wireless Flash Trigger ). Light was diffused through a piece of white plastic curtain.

The Best Arca-Swiss Plate For Sony 200-600mm Lens

Finally found this! Been looking for a compact, well-made, arca-swiss plate with two screws—a 1/4-inch and 3/8-inch—to fit the foot of my Sony FE 200-600mm Telephoto Zoom Lens . The plate with one screw wasn't holding this lens well on a ball head, especially when repeatedly tilted, the screw would loosen a bit no matter how tightly it was screwed in. I do not understand the physics behind it. If you do, please educate me! With two screws, it now stays put, it doesn't come loose even a tiny bit. I don't have to worry about it anymore when I'm busy photographing. This SMALLRIG quick release plate fits perfectly, is rock solid and costs only about twenty dollars. I say 'only' because the alternative, a good replacement lens foot for Sony 200-600mm, made by Kirk or Wimberley , costs more than $75. This arca-swiss plate may work for other Sony/manufacturers' telephoto zoom lenses. I do not have them so I haven't had the opportunity to try it on other

Powered by Blogger

This page contains affiliate links and I will be compensated if you make a purchase after clicking

Tutorials I Found Useful

Comments

Post a Comment